The PLASMA RACK is a 1U sized high-end audio effects unit designed for professional and studio use. A significant expansion of the unique High Voltage Distortion concept behind PLASMA Pedal, the PLASMA Rack features an extra large xenon tube that conducts audio signal at voltages of up to 5500 volts. In essence – you are playing a bolt of electricity, and the electric discharges created in the PLASMA tube are instantly converted back into analog audio signal. The result – a quick, responsive, and extremely heavy distortion with tons of unique character and an extremely satisfying noise-gating effect.

By maxing out the BLEND knob you can achieve a fully wet signal, produced only by the gas-discharge tube. This means that as soon as you stop playing, the electrical discharge within the gas-filled tube is interrupted, and the pedal will not produce any output signal at all. This feature allows you to achieve extreme contrasts between individual notes, by eliminating all of the in-between noises created by the instrument’s pick-ups or by humming strings. PLASMA RACK features a Clean Gate function which allows to apply this noise-gating to the clean signal.

PLASMA RACK converts your instrument’s signal into a rapid series of electric discharges, which results in a large amount of non-linear harmonic saturation that causes extremely rich and responsive attacks, and brings out screechingly sharp overtones and harmonics. These harmonic artefacts, produced as a byproduct of the high-voltage discharge are uncommon in traditional signal amplification, and therefore PLASMA distortion is unlike anything you have heard before.

The PLASMA RACK loses the original DRY input signal and creates a new signal from fluctuations in the electromagnetic field surrounding the gas-discharge tube. This allows to bring out an extremely wide range of frequencies that are often beyond the instrument’s capabilities. This is controlled with a 3-band equaliser.

PLASMA RACK boasts a range of added features: tremolo/ring modulator, Op Amp Drive, MIDI sync, master/slave control for stereo effects when two racks are used together, three external effects loops, and an “oversaturation” effect, similar to an old-school Octa-Fuzz

Features

• Features an extra large xenon tube that conducts audio signal at voltages
• Natural noise-gate
• Unique harmonic saturation
• Extreamly wide EQ
• MIDI sync, master/slave control
• Input Gain control to fine-tune any type of input signal
• Sustain Mode achieves long sustained notes even at Low Voltage settings
• Oversaturate Mode overpowers the Plasma tube to achieve an Octave Up/Overtone effect
• Built-in Plasma Tremolo is a unique Tremolo and Rig Mod effect with adjustable Depth and Dynamic response
• Built-in Distortion Channel that lets you add some High-Class Op Amp dirt to you Dry Signal
• 3 Effects loops are located and different parts of the signal chain and work with line and instrument levels
• Connectivity of two inputs (unbalanced and balanced with PAD), Two outputs and MIDI
• Full MIDI control via CC Messages and Program Change Messages with 8 Preset slots
• Expression input allows you to assign an expression pedal to any parameter of the PLASMA Rack
• Default Boot-Up Settings are saveable to make the Rack gig-ready

For more information, please visit the manufacturer's website.