Avalanche Run is a dreamy stereo exploration multi-tool with up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 different tail lengths (includes sound on sound style lo-fi looping mode), and an assignable expression control that maps the expression jack to any control, including the toggle! The delay section lets you go from tape emulation to bucket brigade style with a twist of the wide range of tone controls. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in EarthQuaker's Dispatch Master only more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. And that’s just the beginning...

Time: This controls the delay time and goes from 0ms to just under 2000ms.

Repeats: Controls the regeneration of the delay, from zero repeats to near infinite.

Tone: Controls the tone for the delay line only. Roll off highs to the left, roll off lows to the right and get a flat response in the middle.

Mix: The is the volume control for the delay line. This blends in the wet with dry until 1 o’clock, 1 o’clock to 3 o’clock boosts the wet signal over the dry and 3 o’clock up brings down dry until it is fully wet when all the way up.

Expression Jack Assign Switch: Use this switch to map the expression jack to one of the assigned controls.

Ratio Selector Switch: Selects delay subdivisions when time is set by the “Tap” switch.

Decay: Controls the decay length of the reverb, short decay counterclockwise, long cavernous decay clockwise.

Toggle Switch (Mode Selector): - "Both" is the standard delay and reverb mode, "Reverse" is reverse delay mode with standard reverb and "Swell" is the volume swell mode.

Mix: This is the volume control for the reverb. Blends in the wet with dry until 1 O’clock, 1 O’clock to 3 O’clock boosts the wet signal over the dry and 3 O’clock up brings down dry until it is fully wet when all the way up.

Features

• Expansive Reverb and Delay unit
• Up to 2 seconds of delay time
• Includes Tap Tempo functionality and subdivision control
• Multiple tail lengths
• Lo-fi looping mode
• Assignable expression control that incorporates exp. jack
• Delay emulates tape to bucket brigade styles and reverse delay
• Expressive plate reverb is capable of cavernous tones
• Flexi-Switch™ allows you to simultaneously use momentary and latching style switching
• EarthQuaker recommend use with a Moog expression pedal, they cannot guarantee compatibility with other expression pedals
• Includes 9v centre-negative 1-amp DC power supply
• All analog dry signal path
• All digital wet signal path with 20Hz – 20kHz frequency response
• Output Impedance: 100 Ohm
• S/N Ratio: 115dB typical
• 24-bit 96kHz A/D & D/A converters
• Assembled, wired and tested in Akron, Ohio

For more information, please visit the manufacturer's website.